Valikko Sulje

Tuotteet

Tuotteet

 

The DSiP-solution with multichannel routing capability

The importance of reliable telecommunication is constantly increasing. The DSiP-solution makes it possible

to use all kinds of communication channels and resources in parallel. The multiple communication channels will appear like a single, uninterruptable and ultra-robust channel for devices, software and equipment that uses the DSiP-system.

DSiP™ is an acronym for Distributed Systems intercommunication Protocol®. It is a carefully tested and documented software package. DSiP provides secure and reliable data communication with high data integrity and multichannel routing capabilities. DSiP ma

y use all kinds of physical transport, sometimes also in parallel, be it IP- or non-IP communication.

DSiP is used in any environments where telecommunication is regarded as a critical, important issue. The solution may be regarded as a multichannel and multipoint-to-point VPN routing system.

DSiP is used, for example in SCADA-, Coastal Surveillance-, Command & Control and Telemetry applications. DSiP works in multi-operator environments

With DSiP, customers have control over, and can:

  • Use communication channels in parallel, so that all channels appear like a single unbreakable channel
  • Control priorities. Important information is routed first, less important later
  • Get control over network timeouts – No undetermined delays or waits!  DSiP is always ”online”
  • Control the usage of communication and bandwidth - DSiP always ”knows” the condition of all routes
  • Always know correct sender and correct receiver = Better security
  • Use strong encryption and timestamps = Better security
  • Automatically route data and use secondary routes if primary connections are broken
  • Have better control over maintenance and configuration
  • Distribute the teleoperator risk by using multi-operator network topology
  • Combine IP and non-IP communication into a SINGLE controllable system
  • Transparently communicate through DSiP-connections = Allow tunneling of protocols through DSiP
  • Build more secure communication systems and decrease costs maintenance
  • DSiP makes equipment and software compatible via intelligent interface mechanisms

Additional info

DSiP Brochure  (*.pdf)
What is DSiP (*.pdf)
DSiP torjuu kyber-uhat (*.pdf)

 

Monikanavareitittimet

Monikanavareitittimet sisältävät useita erilaisia modeemeja, kuten esimerkiksi 4G, 3G, CDMA450, TETRA-modeemeja jne. Laitteessa oleva DSiP-ohjelmisto luo turvalliset tietoliikenneyhteydet kaikkien modeemien, eli kanavien, kautta siten, että useat samanaikaiset yhteydet näyttäytyvät yhtenä katkeamattomana yhteytenä monikanavareititintä käyttäville ulkopuolisille laitteille ja ohjelmistoille. Tämä takaa katkeamattoman langattoman yhteyden säilymisen; Vaikka yksi yhteys katkeaisi, muut yhteydet jatkavat toimintaa saumattomasti. Monikanavareitittimien kanssa voidaan käyttää ulkoisia satelliittimodeemeja.

4Com monikanavareititin

The 4Com multichannel router represents a State-of-the-Art solution for secure and reliable multichannel communication in mobile and fixed applications. The 4ComT device utilizes efficiently all existing telecom networks such as TETRA, 3G/GPRS, 4G(LTE), CDMA-450, Satellite, WLAN and DSL to provide an uninterrupted communication channel between remote– and control room systems. All the parallel telecom channels appear as a single transparent, encrypted and robust data pipe between network peers.

The advanced DSiP Distributed Systems intercommunication Protocol™ traffic engineering and routing protocol ensures reliable and secure communication links between network peers with no need to modify external software or devices needing reliable communication.

The 4ComT device supports simultaneous communication over several operators networks in parallel, in such a way that the communicating devices believe they communicate over a single ultra-robust connection.

4Com features:

  • Intel Atom™ running at 1.3 GHz
  • Integrated TETRA-modem
  • Integrated 4G (LTE) modem
  • 3G modem (HSPA, 3G & GPRS)
  • CDMA-450 MHz option
  • 2 pcs of GPS receivers (GPS and GLONASS)
  • Dual power supply feed 10,5..35VDC
  • Internal UPS for 20s powerless operation
  • Four 10/100 BASE-T Ethernet
  • One 1Gb Ethernet
  • Dual USB 2.0 ports
  • Tripple serial ports, 2 pcs RS232 1pcs RS422/485
  • External Satellite modem connectivity
  • Internal WLAN 802.11 a/b/g hotspot
  • Audio interface
  • VHF radio interface
  • Ambient temperature range –40C to +70C (depending on modems)
  • Operating humidity 5..95% non-condensing
  • Firmware and software in Flash-memory
  • Size 210L x 165W x 60H
  • Weight 1350 grams

 

2Com monikanavareititin

Reliable, Secure and Redundant multichannel communications router with transparent functionality and firewalls.

The 2Com-TETRA multichannel router represents a State-of-the-Art solution for secure and reliable multichannel communication in mobile and fixed applications. The 2Com-TETRA device utilizes efficiently all existing telecom networks such as TETRA, 3G, GPRS, Flash-OFDM, Satellite and xDSL to provide an uninterrupted communication channel between remote– and control room systems. All the parallel telecom channels appear as a single transparent, encrypted and robust data pipe between network peers.

The advanced DSiP Distributed Systems intercommunication Protocol™ traffic engineering and routing protocol ensures reliable and secure communication links between network peers with no need to modify external software or devices needing reliable communication.

The 2Com-TETRA device supports simultaneous communication over several operators networks in parallel, in such a way that the communicating devices believe they communicate over a single ultra-robust connection.

2Com features:

  • Multiple communication interfaces: TETRA, 3G, UMTS, HSDPA/HSUPA, GPRS, WLAN, Ethernet T-base 10/100
  • Multiple peripheral interfaces: Ethernet T-base 10/100, USB, quad serial channels (RS232/484)
  • Internal Firewall with NAT capability
  • Roaming control
  • 3 isolated digital inputs, 2 relay outputs
  • GPS global positioning module
  • Interface for two SIM cards (dual teleoperator possibility for 2G/3G)
  • Remote software update capability
  • Wide supply voltage range: +10..+28Vdc
  • Power consumption min 3 W, max 22 W
  • Operational temperature range -40ºC…+50ºC (std. model)
  • Metal enclosure, size 215x125x40mm (depending on the configuration), weight 600g

 

Additional info

DSiP brochure (*.pdf)
4Com brochure (*.pdf)
2Com brochure (*.pdf)

Remote Terminal Units and Communication Bridges for RTU's

The AM06T versatile multipurpose GPRS-communication bridge is suitable for a vast range of automation-, telemetry-, and remote control applications

The AM06T is designed for acting as a secure communications bridge between remote equipment (RTU's) and control room SCADA. The purpose of the bridge is to bring security to the communication via encryption, time stamping and automatic routing and improve system response time and lowering communication cost.

AM06T brings improved system response and communication cost savings.

In addition to security in communication, the AM06T reduces communication cost in applications, where remote equipment is frequently polled. For example, breaker stations and control units in energy distribution networks are usually frequently polled by the user interface SCADA. The AM06T and DSiP-solution however, does not need to be polled – the AM06T communication bridge is event driven capable of independently reporting back to the SCADA system that a particular remote unit has a changed state or needs service. This behavior removes unnecessary polling, improves system response and saves communication costs.

The AM06T Communication brige's features in short:

  • Multipurpose communication bridge
  • Secure and encrypted communication
  • Embedded GPRS (3G, EDGE, GPRS)-modem
  • LCD for user interface and diagnostics
  • Din-rail mounting
  • Transparent IEC-101 (DNP3) communication
  • Optional M-Bus interface
  • Interfaces to RTU’s and Breaker units
  • Interfaces to security equipment
  • Versatile I/O possibilities
  • Capable of remote firmware update

Additional info

AM06 brochure (*.pdf)
DSiP brochure (*.pdf)

MIM12 - Media interface module - Video Codec

MIM12-moduuli on kompakti audio/video-digitointi-elektroniikka 4Com monikanavareititintä varten. Kortissa on PCIe-liityntä. Korttiin voidaan liittää kaksi analogista videokameraa sekä stereoääni. Videosignaali voi olla PAL/SECAM tai NTSC.

M08 - Valvontakameran kääntöpääyksikkö

Edistyksellinen kauko-ohjattava valvontakameroiden kääntöpääyksikkö

Valvontakameroiden kääntöpääyksikkö M08 on edistyksellinen laite, joka on enemmän kuin pelkkä kääntymiseen tarkoitettu laite. M08 soveltuu käytettäväksi kauko-ohjattaviin valvontasovelluksiin.

Tarkka Servo-ohjaus ja asemointi

Portaaton, tarkka ja tehokas servo-ohjaus mahdollistaa kameroiden kääntämisen suurella nopeudella kohti valvottavaa kohdetta. Suuren nopeuden lisäksi, M08 kykenee äärimmäisen hitaaseen liikkeeseen, mikä on tärkeää kun käytetään suurella polttovälillä varustettua optiikkaa. Asemoinnin tarkkuus on noin 0.03 astetta ja M08-yksikkö tukee 64 ns. esiohjelmoitua asentoa. M08-kääntöpäässä on ainutlaatuinen toiminto, joka portaattomasti hidastaa kääntöpään liikettä suhteessa optiikan zoom-asentoon. Mitä kauemmas katsotaan, sen hitaammin kääntöpää liikkuu - piirre helpottaa valvottavan kohteen seurantaa. Toiminto on käyttäjän säädettävissä.

M08-kääntöpäässä on kolme ns. video-insert toimintoa. Video-insert toiminto lisää valvontakuvaan esimerkiksi päivämäärän, käyttökohteen nimen tai tosi-suunnan näytön.

The M08-kääntöpää on saatavana myös kahdella kamerahyllyllä, jolloin toiseen voidaan asentaa esimerkiksi päivänvalokamera ja toiseen IR-kamera. Myös IR-valaisimen asennus on mahdollista. Kääntöpään liikeratoja voidaan säätää jolloin kattoasennus on myös mahdollista.

Additional info

M08 leaflet (*pdf)
M08 technical manual (*.pdf)

Myynti ja markkinointi

Ota yhteys Ajecon myyntiin tiedustellaksesi saatavuutta ja hintoja.

etunimi.sukunimi(at)ajeco.fi tai sales(at)ajoco.fi
puh +358 9 4770 470

Muut yhteystiedot sekä yhteydenottolomake täällä.